Beko 26WLZ530HID, Руководство по эксплуатации

Страница: 15 / 37

13
Analogue Manual Tuning
System I
Channel C 4
Fine tuning +00
Search
Programme no
1
Skip No
Frequency
Select
Save
Back
Exit
62.25 Mhz
6.4.2-Manual tuning of analogue
channels and storing in the memory
6.4.2.1-If you already know the
channel number
Select Analogue Manual Tuning by
pressing the Up/Down movement
buttons in the CHANNEL SETUP
menu and confirm by pressing the
OK button. Analogue Manual
Tuning menu will be displayed.
In the Program no tab, enter the channel
number where you would like to store the
searched channel. Select the system in which
you would like to make the search from the
System
tab by pressing the
Right/Left
movement buttons and move to the
Channel
tab by pressing the down movement button.
Press OK on your remote control to select
“S” ” band or “C” ” band, scroll to the Search
tab by pressing the down movement button
and press Right/Left movement buttons
to start the search. Press the Red button
on your remote control to store the channel
you found. The channel will be stored to the
channel number of your choice.
6.4.2.3-Fine Tuning
If the channel you found is not of the desired
quality and requires Fine Tuning, then
select the Fine tuning tab by pressing the
Down movement button in the Analogue
Manual Tuning menu. Using the Left/
Right movement buttons on your remote
control, adjust the broadcast displayed on
the screen to your desired quality. Under
normal circumstances, you will not require to
use the Fine Tune function. The AFC values
of your television will automatically adjust and
lock themselves to the channel. However,
you might need it in case the television
transmitters do not operate according to
the standards. Press the Red button on
your remote control to store the settings you
made.
6.5-Electronic TV Guide (EPG)
Electronic TV Guide is for Digital
broadcasts only. If it is supported
by the broadcasting enterprise, the
Electronic TV Guide gives general
information about all of the programs of the
next 8 days. To display the Electronic TV
Guide, press EPG button on the remote
control and EPG will be displayed.
Analogue Manual Tuning
System I
Channel C 4
Fine tuning +00
Search
Programme no
1
Skip No
Frequency
Select
Save
Back
Exit
62.25 Mhz
Select the system in which you would like to
make the search from the
System
tab by
pressing the Right/Left movement buttons
and move to the Channel tab by pressing
the down movement button. Press OK on
your remote control to select “S” ” band cable
input or “C” ” band aerial input and enter
the channel number with numeric buttons.
Move onto the Program No tab and enter
the channel number in which you would like
to have the channel stored. If the broadcast
viewed on the screen is of your desired
quality, press the Red button on your remote
control to store the action into memory.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the menu for any reason, simply press the
EXIT button.
6.4.2.2-If you do not know the
channel number
Select Analogue Manual Tuning by
pressing the Up/Down movement buttons in
the CHANNEL SETUP menu and confirm by
pressing the OK button. Analogue Manual
Tuning menu will be displayed.