Beko 17WLB450S, Руководство по эксплуатации

Страница: 11 / 31

12-
When you are sure the aerial is
connected properly press the OK button.
Autoprogam will start.
Use the Program down button to select
AUTOPROGRAM and then the OK
button. A list of countries will appear.
Select (UK) using Program and Volume
buttons.
To cancel Autoprogram whilst it is
working press the
Menu
button
repetitively.
Please note:
If auto sort fails to arrange the programmes in
the required sequence please refer to programme
organising.
In the Setup menu select
PROGRAM No. using the Program
down
button and use the
Volume
up button to change the Program
No to 01.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button to
select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Use the Program down button to
select PROGRAM No.
Use the Volume up/down or
numeric buttons to select the
desired programme number.
Use the
Program down
button to
select STORE. Press the OK button
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
Manual tuning
If you want to tune manually:
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
OK
MENU
OK
As Autoprogram stores a channel it will
appear briefly on the screen before the
search continues.
OK
Your TV is now tuned and ready to use.
SETUP
CHANNEL
SYSTEM
SEARCH
FINE TUNE
PROGRAM NUMBER
AUTO PROGRAM
STORE
I