9
OrangeBox
5. Technical guide for installing BEKEY OrangeBox
5.1 Mechanical installation
The OrangeBox can be mounted with double sided tape or using a cable tie
through the cable eye on the box. The cable eye can be removed with a cutter if
there is no need for it. When making a visible assembly of the door unit, place it
indoor, in a membrane can, or a similar box.
5.2 Electrical Installation
The door unit is mounted with 50 cm (≈ 1.64 ft.) cable with four leads.
Two leads (red and black) for voltage supply and two
leads (orange and brown) to activate the door lock.
The supply voltage (VCC1 and VCC2) can be both
direct current (DC), regardless of polarity and
alternating current (AC).
The door lock is activated via a potential free normally open contact (RL 1
and RL 2).
LEDs
VCC 1
Black
VCC 2
Red
RL 1
Orange
RL 2
Brown
Wire for supply and relay
Bluetooth
®
Address
Cable eye
