BEKA BA654D, Руководство пользователя

Страница: 21 / 34

21
5.5.7 Batch Limit
To prevent accidental over-filling, the Batch
Limit defines the maximum batch that may be
dispensed. If a batch setpoint greater than the
Batch Limit is entered, it will be accepted but a
warning will appear on the screen. The
position of the decimal point will be the same
as the batch display. See 5.5.5.
99999999
Set Batch Limit
5.5.8 Batch Names
This function enables up to nine pre-entered
batch setpoints to be identified with individual
names each having up to sixteen
alphanumeric characters. The name is
displayed when the Batch Size setpoint is
selected or adjusted see sections 5.5.9 and
5.5.10. Some of the operator display screens
also show the setpoint name.
Batch 1
Set Batch Names
5.5.9 Batch Size
The named batch setpoints can be assigned a
value with this function. The position of the
decimal point in all the setpoints will be as
defined by the Batch D.P. function. - See 5.5.5.
Batch 1
Batch 2
To
Batch 9
00000000.
Set Batch Size
Note: May be included in Operator Menu.
See 2.1
5.5.10 Select Batch
This allows the batch controller’s operating
setpoint to be selected from the nine pre-
entered setpoints. To select, highlight the
name of the required setpoint and press E.
The setpoint value will be shown at the bottom
of the display screen.
Batch 1
Batch 2
To
Batch 9
XXXXXXXX
Select Batch
Note: May be included in Operator Menu.
See 2.1
5.5.11 Batch History
The volume of product dispensed in the
previous nine batches is recorded by this
function.
Batch n: XXXXXXX
n-1:
n-2:
to
n-9:
Batch History
Note: May be included in Operator Menu.
See 2.1
5.5.12 CONTROL2delay
(Control 2 Start Delay)
At the start of a batch, Control 1 is energised
immediately the Start button is operated.
Control 2 may be energised at the same time,
or delayed for up to 3600 seconds by this
function.
0000
CTL2 Delay: Seconds