BEKA BA458C, Руководство пользователя

Страница: 19 / 45

19
If ‘Clear G Total’ is highlighted and the E
pushbutton operated, a second screen will be
presented. To confirm that the Grand Total is
to be zeroed highlight ‘Continue’ and press E
which will result in the instruction being
executed.
Continue
Cancel
Clear Grand Total
6.4.13 Defaults
This function allows the configuration defaults
listed in section 6.3 to be globally restored.
Although useful for defining a starting point
when commissioning a batch controller, the
settings overwritten by this command can not
be recovered
CAUTION
After restoring default configuration the
previous settings can not be recovered.
To prevent the default settings being
accidentally restored, the instruction has to be
confirmed before it will be executed.
Restore Defaults
Cancel
Restore Defaults
If ‘Restore Defaults’ is highlighted and the E
pushbutton operated, a second screen will be
presented. To confirm that the defaults are to
be restored, highlight ‘Continue’ and press E
which will result in the instruction being
executed.
Continue
Cancel
Restore Defaults
6.4.14 Security
A summary of instrument security is contained
in section 6.1 of this manual.
This security function enables the four digit
security codes protecting the configuration and
operator menus to be defined. It also allows
the contents of the operator menu to be
selected.
Config Code
Operator Code
Operator Menu
Security
Highlighting the required function and pressing
P will result in a selection menu being
displayed.
Each of the two security codes is entered digit
by digit, when all four digits have been set,
pressing E will enter the code and return the
display the security menu.
0000
Set Config Code
Note: Default code 0000 disables the
security function and allows
unrestricted access to the menu.
Access to the Configuration Menus is
also protected by an external link as
described in section 6.1
Contents of the Operator Menu are defined by
toggling the ‘On / Off’ box associated with
each item. To make the selection, highlight
the item to be changed and operate the P
button. The item may then be turned ‘On’ or
‘Off’ using the Up or Down push-buttons.
Batch Sizing: On
Batch Select: On
History On
Config Menu: On
Set Operator Menu
Pressing E will enter the selection, another
item may then be selected or the display
returned to the Security menu by pressing E
again.