BEKA BA337E, Руководство пользователя

Страница: 34 / 61

button twice.
See 6.6 and 6.7
Step 4 Select the interval between display
updates
Using the
&
or
*
button select
uPdAtE
in the configuration menu and press
(
to reveal how frequently the Rate
Totaliser display is updated. Using the
&
or
*
push button select
0 . 5
(0.5
seconds i.e. 2 display updates per
second). Enter the selection and return
to the
uPdAtE
prompt in the configuration
menu by pressing the
)
button.
See 6.8
Step 5 Upper display
Using the
&
or
*
button select
di5P-1
in the configuration menu and press
(
to select whether flow rate or total flow is
shown on the upper 8 digit display. The
required maximum total of 100000 with
0.01
resolution can only be
accommodated on the top display.
Therefore using the
&
or
*
button
select
totAL
and press
)
to enter the
selection and return to the
di5P-1
prompt in the configuration menu.
See 6.9
Step 6 Lower display
Using the
&
or
*
button select
di5P-2
in the configuration menu and press
(
which will show if the lower display is
on
or
oFF
. The Rate Totaliser is required to
display both total flow and the rate of
flow so the lower display is required.
Using the
&
or
*
button select
on
and
press
)
to enter the selection and
return to the
di5P-2
prompt in the
configuration menu.
See 6.10
Step 7 Position rate & total decimal points
Select
dP
from the configuration menu
and press
(
. The upper display already
defined as the total display by function
di5P-1
will be activated and identified by
the Total annunciator. Using the
&
or
*
push button position the decimal
point in front of the second least
significant digit to give a total display
resolution of
0 . 00
.
Pressing the
(
button will show the rate
display, but in the upper display position
with the Rate annunciator activated.
Using the
&
or
*
push button position
the decimal point to the right of the least
significant digit so that it is not visible to
give a total display resolution of
1
.
Finally press the
)
button to enter the
selections and return to the
dP
prompt in
the configuration menu.
See 6.11
34