Appendix
Operating manual NORA Alu
V2.13 E
Page 41 of 52
13.6 Mounting instructions
13.6.1 Replacement of the rear castors
Image 1:
Required tools:
1 hexagon
screwdriver 8 mm
with spherical head
1 Allen wrench 8
mm (shortened
length)
Image 2:
Additional parts/tools:
1 rear castor
(Order number
K0000770)
1 thread-locking fluid
(medium tight)
Image 3:
Loosen the screw
with the hexagon
screwdriver.
Image 4:
Remove the screw
by means of the
screwdriver.
Image 5:
Prior to screwing a
new castor, you
must apply thread
lock fluid (
medium
tight at least 21
Nm
) to the thread of
the screw.
Image 6:
Place the new
castor in position
and retighten the
screw.
Caution: the thread lock fluid must dry at least 3 hours before the device can be
loaded.
Should you use thread lock fluid from another manufacturer, the drying times
specified by this manufacturer must be observed!
Re-assemble in reversed order!
Содержание NORA Alu
