Beissbarth Start Line MS 201 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 25

background image

Product description | Start Line MS 201 | 31

en

1 695 108 073

2016-07-27

|

Bosch Automotive Service Solutions srl

3. Product description

3.1

Intended use

MS 201 is used to demount/ mount the car tire. The
dimension of the rim is 9”-22”. The maximum wheel
diameter is 1050 mm, the maximum tire width 13". Any
other use shall be construed as improper use.

!

The manufacturer assumes no liability for any
damage arising from operation in a manner not
specified in this operating manual.

3.2

Machine rating plate

Each MS 201 is equipped with an identifying plate
that lists the technical parameters and serial number.
It is prohibited to remove the rating plate from the
MS 201.

i

Each MS 201 is equipped with an identifying
plate that lists the technical parameters and serial
number.

Symbol

Meaning

V

Rated voltage

A

Rated current (during operation)

kW

Power

Hz

Frequency

Ph

Phase of the voltage supply

bar

Operating pressure from the compressed air

supply

Serial N.

Serial number of the MS 201

CE

CE marking

i

Complete information on the model and serial
number will help our technical personnel provide
you with service and technical support. It will also
make replacement of parts more accurate and
easier. If there is difference between the data in
the operating manual and the data on the rating
plate, that on the rating plate should be considered
correct.

3.3

Device description

!

All information about the MS 201 must have
been understood. It must be clear how

$

accidents can be avoided.

$

the tire changer must be operated.

$

the functions and control elements can be used.

!

Accidents can be prevented only if every step
required for operation is understood.

!

The MS 201 must be installed correctly, operated
correctly and also serviced periodically.

Fig. 1:

Product description MS 201

1 Hexagon shaft: for securing the mounting head

2 Cover: dust prevention

3 Mounting arm locking valve: for locking/unlocking the mounting

arm

4 Mounting head: the tool for demounting/mounting the tire

5 Clamp jaw: for clamping the rim

6 Turntable: for placing the wheel

7 Pedal control system

7-1 Mounting arm control pedal: controls pivoting of the mounting

arm

7-2Clamping jaw control pedal: control open/close of the clamping

jaw

7-3Blade control pedal: control the blade movement

7-4Turntable rotation control pedal: control the rotation of the

turntable

8 Bead-breaker blade: for unseating the tire from the rim

9-Blade arm: supports the bead breaker blade

10 Lubricant holder: conveniently positioned for fastening a variety

of lubricant containers

11-Column: support horizontal arm

12-PCL Inflation gun: inflating for the tire

13-Air treatment assembly

13-1 Pressure-limiting valve, for regulating the supply pressure

13-2 Water separator

13-3 Atomized lubricator: provides oil for the air passages

«
...
5
6
7
8
9
...
»

Содержание Start Line MS 201


























Отзывы:

Нет отзывов

Похожие инструкции для Start Line MS 201

Бренд: Butler Страницы: 78

Бренд: Butler Страницы: 93

Бренд: Butler Страницы: 106

Бренд: Butler Страницы: 111

Бренд: Butler Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды