5
Note:
This step can be skipped for signal image. For multi-image, it
’
s OK if image number and item
requirement are in consistent. Following operations can be taken to set when layout are not in consistent.
Step 3:
Press
“
OK
”
and return to main menu interface; select
“
Image parameter
”
and enter into
its setting interface to set size and position of each image.
Note:
there are two ways for number input:
(1) Adjust by rotate knob. Step length can be adjusted by
“×
1
” “×
10
”“×
100
”
, for instance,
“×
100
”
means that
number of rotate knob increases by 100 each time.
(2) Input by number of the front panel. For example,
of the
key refers to figure 1.
Step 4:
Press
“
MENU
”
and r
eturn to main menu interface; select
“
Save setting
”
to enter into Data
storage interface; select any mode and click
“
OK
”
to save data.
