Beijing ART Tech A-GPRS1090I Скачать руководство пользователя страница 15

Страница: 15 / 54

A-GPRS1090I User’s Manual Version: 6.021

Chapter 3 Instruction of function configuration

Lead out configuration

It can save the information which had been changed.

Lead in configuration

It can on-load the information that you have saved before.

Rest the DTU mode

When use it; the mode will carry out software rest.

Restore factory settings

When use it, the mode will carry out restoring the factory settings.

DTUTYPE

DTUTYPE is the product device number, makes up with ten ASCII characters. This parameter only can be read, it has

been set up by the factory, so users can not change it.

DTUID

DTUID is the unique serial number, by this unique serial number, ARTServer can distinguish the module which has

connected. This unique serial number makes up with eight ASCII characters; users can change it to any meaningful

value.

SWVER

SWVER reflects the information about software version, it has been set up by the factory, so users can not change it. It

can supply more useful recommendations when users need technical support.

DTUNAM

It can distinguish

different devices when multiple modules are being used. DTUNAM makes up with 15 characters.

PHON

This parameter need be configured by userself, it is not a parameter of system, so it will not affect the module operating

status. Server-side uses it to read mobile phone number, it makes up with 11 ASCII characters, such as “15810437433”.

MODE

Содержание A-GPRS1090I























































Результаты поиска

Содержание A-GPRS1090I

Отзывы:

Бренды по названию

Популярные бренды

Beijing ART Tech A-GPRS1090I, Руководство пользователя

Результаты поиска

Содержание A-GPRS1090I

Отзывы:

Бренды по названию

Популярные бренды