28
shown in Picture 6.
Picture 6
9. Important Notes
A.
Whatever you choose Static IP or DHCP mode, please make sure that the
HEV-10W, router, and your devices are in the same network segment.
B.
After setting a new static IP address, it will take effect immediately without
restarting. From static IP to "DHCP" IP mode, you will need to restart the
HEV-10W and enter the router to view the IP address assigned by the router to the
HEV-10W. The DHCP server will allocate an IP address to the encoder
automatically.
C.
If you have set a new password but you forget it, you can press the button about
15s to restore to factory settings.
D.
When using the multicast function, make sure that the connected router supports
the multicast function.
When using multicast, only one of wireless and wired can
push the stream, you can choose in the multicast settings.
When the wireless is in
AP mode, the multicast function is not supported.
E.
Please note that lower bitrates require less bandwidth and may allow for a more
stable stream while higher bitrates offer better video quality, but require more
network bandwidth. Wired streaming supports up to 16M bit rate, wireless
streaming supports up to 8M.
If you are connected to both wireless and wired at
the same time, please choose one of the methods for streaming instead of using
both methods.
F.
Please set the Key Frame Interval (GOP) to always twice the Frame rate before
starting live streaming. Please set the Bitrate Control to CBR for the best possible
streaming experience.
