17
7.3.3 Considerations of Simultaneous Use of Wired and Wireless
HEV-10W supports both wired connection and wireless connection mode.
Need to
pay attention to the following.
If your HEV-10W is connected to a router via wired and wireless at the same time,
you can access the encoder via wired IP and wireless IP at the same time. Note
that the wired IP and wireless IP cannot be set exactly the same.
If your HEV-10W is wired to a router and wirelessly connected to another router,
and the wired IP and wireless IP are on the same network segment, then you
cannot access the encoder through wired IP and wireless IP at the same time.
Only one of them can be accessed. If you connect to the wired first, you can only
use the wired. At this time, if you want to change to wireless, you must first unplug
the network cable, then connect to the wireless and use it. If you connect to
wireless first, you can only use wireless. At this time, if you want to change to
wired, you must first set wireless to off, then connect the network cable and use it.
If your HEV-10W is wired to a router and wirelessly connected to another router,
and the wired IP and wireless IP are not on the same network segment, then you
you can access the encoder via wired IP and wireless IP at the same time.
7.4 RTMP Configuration
RTMP is supported by most video streaming platforms, but you must first obtain a
URL and stream key/name from the service you choose to stream to. Log into your
account’s settings and retrieve the URL and stream key/name. Please navigate to
8.1
YouTube Live
and
8.2 Facebook Live
to see the typical applications.
