background image

Foreword

Beijer Electronics, MAEN945B

H-T40m Installation and Operation Manual 

Foreword

H-T40m is a Human Machine Interface (HMIs) with a 3.3" STN Liquid Crys-
tal Display, and is water- and dust-resistant according to IP65/NEMA4X (in-
door use only). 

H-T40m-P can be equipped with the HMI I/O Controller, an expansion I/O 
module aimed at providing smaller system applications with simple I/O control 
interface without the need for a PLC. The compact expansion module is easy to 
install and fits seamlessly on the back of the operator panel.

H-T40m is CE-marked and meets your need to be highly transient-resistant 
while in operation. 

Also, its compact design makes connections with other machinery more flexible, 
thus achieving the optimal performance of your machines. 

H-Designer is used to design applications of H-T40m; it is reliable, user-friend-
ly and compatible with many models.

© 

Beijer Electronics AB, MAEN945B, 2009-03

Please read the entire installation manual prior to installing and using this equipment. Only qualified per-
sonnel may install, operate or repair this equipment. Beijer Electronics AB is not responsible for modified, 
altered or renovated equipment. Because the equipment has a wide range of applications, users must acquire 
the appropriate knowledge to use the equipment properly in their specific applications. Persons responsible 
for the application and the equipment must themselves ensure that each application is in 
compliance with all relevant requirements, standards and legislation in respect to configuration and safety. 
Only parts and accessories manufactured according to specifications set by Beijer Electronics AB may be 
used.
BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, 
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT, 
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE THE REPAIR, REPLACE-
MENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE REM-
EDY SHALL BE AT THE SOLE DISCRETION OF BEIJER ELECTRONICS AB. 

Содержание H-T40m Series

























Отзывы: