Image and CODESYS update
4. When asked if
DC support for EtherCat
should be installed, answering
Yes
or
No
will have the following consequences
Yes:
LAN A will be reserved for EtherCAT and LAN B for ethernet
communication
No:
Both LAN A and LAN B can be used for ethernet communication
5. Answer
Yes
when asked if
Power-fail supported retain
should be enabled
6. Remove the USB flash drive and reboot the panel
Note:
Before downloading a new CODESYS Runtime, the panel image should always first be
downloaded to the operator panel again, even if there are no changes to the panel
image. If only the CODESYS Runtime is installed, then this may result in problems
connecting to and communicating with other devices.
Beijer Electronics, MAEN205G
24
