Foreword
Beijer Electronics, MA00757A
Service and Maintenance Manual for EXTER Operator Terminals
Foreword
This manual contains detailed information about the EXTER series operator
terminals, including descriptions of various actions that can be carried out in order
to maintain or update the operator terminal hardware and software.
The manual is intended for persons that should be able to carry out basic
maintenance and replace common parts in an EXTER-series operator terminal.
The manual assumes that the most recent versions of the system program (firmware)
and configuration tool are used.
Please see the Information Designer Reference Manual (MA00749B) for a descrip-
tion of the configuration tool and the installation manuals for information regarding
installation.
Function-based descriptions are available in the User’s Guide (MA00750A).
©
Beijer Electronics AB, MA00757A, 2006-07
The information in this document is subject to change without notice and is provided as available at the time of
printing. Beijer Electronics reserves the right to change any information without updating this publication. Beijer
Electronics assumes no responsibility for any errors that may appear in this document.
All examples in this document are only intended to improve understanding of the functionality and handling of
the equipment. Beijer Electronics AB cannot assume any liability if these examples are used in real applications.
In view of the wide range of applications for this software, users must acquire sufficient knowledge themselves in
order to ensure that it is correctly used in their specific application. Persons responsible for the application and
the equipment must themselves ensure that each application is in compliance with all relevant requirements,
standards and legislation in respect to configuration and safety.
Beijer Electronics AB will accept no liability for any damage incurred during the installation or use of equipment
mentioned in this document.
Beijer Electronics AB prohibits all modification, changes or conversion of the equipment.
