manualshive.com logo in svg

beier USM-RC-2, Руководство по эксплуатации

Поделиться
Скачать
beier USM-RC-2 Скачать руководство пользователя страница 68

D 

 

Sound module USM-RC-2 

 

 

68  

BEIER-Electronic 

03.02.2014 

The flashing rate for the indicators can be set, too. The values for „on“and „off“, 
multiplied by 10ms, is the duration of the light and dark phases of the turn indicator. 
 
You can choose here how the bending lights are switched on: 
The variant "Bending light via steering on prop. channel #2" switches on the right 
bending light, if the area "A" of prop. channel #2 is reached and switches off, if the 
area "A" is left again. The left bending light is switched on, if the area "D" is reached 
and is switched off again, if the area "D" is left. The switching thresholds for this can 
also be set as desired under Configuration – Proportional channels. 
The variant "Bending light via indicators" switches on the bending light, as long as the 
corresponding indicator is active. 
Both variants can be combined as well. 
 
For the daytime running light there is the option that the light is only activated when 
also the driving sound is on. 
 
The ship light functions can be configured to detect automatically the condition of "in 
operation" or "at anchor" using the throttle channel at prop. channel #1. The condition 
"in operation" is automatically switched off, if the throttle channel is in neutral for a set 
time. After the set time has expired (1-255s), it will be switched over for example from 
"in operation" to "at anchor". 

Содержание USM-RC-2





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды