GB
Switching module RC-SM-4
16
BEIER-Electronic
22.09.2020
Mode 8: 4-way light switch single (step switch)
In this mode the RC-SM-4 works like a kind of step switch with 5 steps (step 0 - step
4).
In the area A, the state of the light switch is increased by one step. In area D, the
state of the light switch is reduced by one step.
Depending on the state of the light switch, the outputs are controlled as follows:
State
Output 1
Output 2
Output 3
Output 4
0
1
2
3
4
One output is always activated per state and all other outputs are off.
If the light switch is on state 4 and is increased by a further step, the state jumps
again to 0. If the state of the light switch is on 0 and is reduced by another step, state
jumps again to 4. The light switch therefore runs “in a circle".
The intermediate areas B and C are not evaluated in this mode.
Short in area A:
State of the light 1
Short in area D:
State of the light switch - 1
Step +
Step -
2.0 ms
1.8 ms
1.5 ms
1.2 ms
1.0 ms