VINTAGE DELAY VD400
Vintage Analog Delay Effects Pedal
Thank you for showing your confidence in us by purchasing the
Behringer VINTAGE DELAY VD400. This ultimate effects pedal is designed
to deliver amazing delay sounds comparable to state-of-the-art studio
processors. Thanks to its parameter controls, you’ll have plenty of cool
sounds at your disposal to handle almost any situation.
The delay effect creates a delay of the input signal with various
repetitions. Different tempo settings allow interesting delay effects.
1. Controls
(1)
The
REPEAT RATE
control adjusts the delay time (repetition rate).
(2)
The
ECHO
control adjusts the effect output level.
(3)
INTENSITY
control adjusts the number of repetitions.
(4)
The
ON/BATT LED
illuminates when the effect is activated.
It also serves as a battery level indicator.
(5)
Use the footswitch to activate/deactivate the effect.
(6)
Use this ¼" TS
IN
connector to plug in the instrument cable.
(7)
The ¼" TS
OUT
connector sends the signal to your amp.
(8)
The ¼" TS
DIR OUT
connector sends the unaffected signal
to connect, for example, to a separate amp.
◊
◊
If you use the OUT connector only, it will send the affected
signal and, when deactivated, the unaffected signal. When
using both the OUT and the DIR OUT, the VD400 acts like an
A/B box. This means when activated, the OUT sends only the
echo signal while the DIR OUT carries the dry signal. When
deactivated the OUT is muted while the DIR OUT sends the
unaffected signal.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
V 1.0
(4)
(1)
(7)
(8)
(6)
(3)
(5)
(2)
Содержание VINTAGE DELAY VD400
Страница 23: ......
