25
E
Channel
Insert
Subgroup
Insert
Fig. 3.2: Wiring the MODULIZER PRO in the insert path
With certain special effects, for example the limiter, you should insert the MODULIZER PRO rather than
connecting it to the aux bus. Use a dedicated insert cable to connect the left audio channel with a channel
insert on your mixing console (fig. 3.2).
3.4 Using the MODULIZER PRO as an effects device for instruments
With its extensive MIDI implementation the MODULIZER PRO can also be used, for instance, as a multi-
effects device in a guitar rack. Of course, you can wire it both in stereo and mono.
Fig. 3.3: Connecting the MODULIZER PRO to a guitar amp (send/return-mono)
The following hints illustrate the MODULIZER PROs versatility if used with a guitar amp. Basically, the
MODULIZER PRO should be inserted between the preamp and the power stage. Almost all guitar amps have
an insert or effect loop to send the preamp signal of the guitar amp to the audio inputs of the MODULIZER PRO.
The MODULIZER PRO processes the preamp signal and sends it back via the guitar amps return bus (power
amp in), from where it is routed to the power stage. When you use a stereo rack system for amplification, you
3. APPLICATIONS
All manuals and user guides at all-guides.com
