14
EDIT D: Bandlimit: this parameter enables you to filter the feedback path, which is useful for feedback set-
tings of up to 100%.
+
Tip: there is no limitation as to the range of instruments that can be processed with a flanging
effect. Check out vocal sounds too, but remember that less is often more!
Spatial Flanger
Includes an additional stereo effect giving the audio material more room acoustics information. The parameters
are the same as the jetstream flanger.
Ultra Chorus
Think of a string quartet with each musician playing the same notes. As a matter of fact, however, musicians
can never play exactly the same, which results in a sequence of slightly detuned and delayed signals. In a
chorus, copies of the original signal are delayed by 20-40 ms, slightly detuned and modulated by an LFO. The
MODULIZER PRO features no less than 8 voices, which corresponds to a group of 8 musicians playing simul-
taneously.
The parameters:
VARIATION: Speed: controls the LFO speed between 0.1 and 5 Hz.
EDIT A: Delay: this parameter adjusts the delay time (1-80 ms).
EDIT B: Depth: sets the modulation depth.
EDIT C: Stereo Width: positions the individual voices on the stereo basis.
EDIT D: Wideness: controls the effect width by detuning the individual voices against each other.
+
Tip: The Ultra Chorus widens the audio material, for example to enhance thin-texture key-
board pads, give vocals more room acoustics information and guitar sounds a dreamy charac-
ter.
Stereo Imager
This effect is used to process stereo mix signals, by splitting up the signal in middle and side information (MS
matrix). Both components can be raised separately in level and positioned on the stereo basis. Additionally,
the side signal can be shifted in phase to enhance the stereo effect even further.
The parameters:
VARIATION: Crossover Frequency: adjusts the phase shift onset.
EDIT A: Gain: allows for adjusting level corrections (-6 ... +6 dB).
EDIT B: Spread: sets the intensity of phase shift and thus the stereo width.
EDIT C: Mono Pan: positions the mono components on the stereo basis.
EDIT D: Stereo Center: positions the stereo components on the stereo basis.
+
With the MIX function the ratio of center vs. side information is controlled
+
When applying increasing stereo width to heavily reverberated audio material, the reverb can
sound unnatural and too intense.
3D Spacemaker
Similar to the Stereo Imager, this algorithm processes the stereo components. Through the use of several
psycho-acoustic phenomena, it also generates a kind of envelope around the room acoustics information and
thus allows for 3D sound with only 2 speakers.
The parameters:
VARIATION: In-Out: selects the type of 3D function (with/without emphasis on middle signals).
EDIT A: Gain: allows for adjusting level corrections (-6 ... +6 dB).
1. INTRODUCTION
All manuals and user guides at all-guides.com
