guitar link ucg102
19
Installation for Windows
ASIO-USB Control Panel does not show BEHRINGER USB AUDIO as Device
Check USB connection. If possible, try a different USB cable or USB port.
=
Connect UCG102 directly to PC or Laptop, not via a USB hub.
=
Close the application and re-run “setup.exe“ in the folder "ASIO_driver" on the CD.
=
Latency time too long
Start the
1)
ASIO-USB Control Panel
from within the audio software (may be called
ASIO Config
or similar).
USB Device
2)
=
BEHRINGER USB AUDIO
.
Click on the
3)
ASIO
tab.
System Performance
4)
=
rapid
(or even
highspeed
).
Clicks or dropouts in recording
Start the
1)
ASIO-USB Control Panel
from within the audio software (may be called
ASIO Config
or similar).
USB Device
2)
=
BEHRINGER USB AUDIO
.
Click on the
3)
ASIO
tab.
System Performance
4)
=
normal
.
Visit
for some helpful advice about optimizing Windows XP for music applica-
tions.
Содержание GUITAR LINK UCG102
