Behringer GUITAR LINK UCG102, Руководство по установке программного обеспечения

Страница: 11 / 30

guitar link ucg102
11 Installation for Windows
Installing the Guitar Combos software 2.2
The Guitar Combos software consists of three different combos. Choose any or all of them for in-
stallation. With the serial number on the CD sleeve you can fully activate one combo. For details,
refer to the imprint on the CD sleeve. All other combos can be run in demo mode with the following
restrictions:
Saving of sounds is disabled
=
Quits after 30 minutes
=
Total recall is disabled
=
To install a combo on your system, proceed as follows:
From the folder "NI Guitar Combos" 1) on your CD, choose the combo you wish to install and open
the respective archive file (ZIP) by double-clicking on its entry.
Double-click on "Setup.exe" to start the installation.
2)
Follow the on-screen instructions. 3)
If you have the serial number for the installed combo:
Accept to start the 4) NI Service Center , by checking the respective entry.
If your computer is not connected to the internet, choose the offline registration method
+
to activate the combo via another computer.