EURODESK SL3242FX-PRO/SL2442FX-PRO
Introduction
4
Introduction
1.
Congratulations! With the EURODESK you have acquired a state-
of-the-art mixing console that sets new standards. Right from the
very start it has been our goal to design a revolutionary unit that
can be used for a great variety of applications. And indeed, this
overwhelming mixing console gives you plenty of functionality and
a broad range of connection and expansion options.
BEHRINGER is a company with its roots in professional recording
studio technology. For many years now we have been successful
in developing products for studio and live use. These include mi-
crophones and studio gear of all kinds (compressors, enhancers,
noise gates, tube processors, headphone amplifiers, digital effects,
DI boxes, etc.), monitor and P.A. speakers as well as professional
live and recording mixers. Our entire technical know-how has gone
into your EURODESK mixing console.
FBQ Feedback Detection System
One of the most outstanding features of this console
is the FBQ Feedback Detection System, which is
part of the graphic equalizer. This ingenious circuit
makes it possible to detect and subsequently
eliminate feedback frequencies very quickly. FBQ
increases the brightness of the EQ fader LEDs for the frequency
bands where feedback is occurring. What used to be a tedious
search for feedback frequencies is now mere child’s play.
IMP “Invisible” Mic Preamp
The microphone channels are equipped with
BEHRINGER’s brand-new high-end IMP Invis-
ible Mic Preamps, which offer you:
130 dB of dynamic range and hence an
=
unbelievable amount of headroom,
a bandwidth from below 10 Hz to above 200 kHz for the crystal-
=
clear reproduction of even the slightest details,
extremely noise and distortion-free circuitry for absolutely
=
natural sound and neutral signal reproduction,
perfect adaptation to any microphone on the market (upto 60
=
dB gain and +48 V phantom power), and
the possibility of pushing the dynamic range of your 24-bit/192-
=
kHz HD recorder to the max and thus achieving ultimate
audio quality.
What is more, the EURODESK comes with two ef-
fects processors using 24-bit A/D and D/A convert-
ers and the effects algorithms of our renowned 19"
multi-effects device VIRTUALIZER PRO DSP2024P.
Each processor offers 99 presets with first-class room
simulations, delay and modulation effects as well as compressor,
tube distortion and numerous other effects available—all with
excellent audio quality!
The mixer is equipped with a state-of-the-art integrat-
ed switch-mode power supply. Unlike conventional
designs, this supply automatically adapts to supply
voltages between 100 and 240 V. With its consider-
ably higher efficiency, it is also more economical in
terms of power consumption than standard power supply units.
Before you get started
1.1
Shipment
1.1.1
Your product was carefully packed at the factory to ensure safe
transport. Nevertheless, if the box is damaged inspect the unit
immediately for signs of damage.
If the unit is damaged please do NOT return it to us,
+
but notify your dealer and the shipping company im-
mediately; otherwise, claims for damage or replacement
may not be granted.
We recommend that you use a flight case to give the unit
+
optimum protection during use or transport.
Always use the original box to prevent damage during
+
storage or transport.
Make sure that children cannot play unsupervised with
+
the unit or its packaging.
Please ensure proper disposal of all packing
+
materials.
Initial operation
1.1.2
Ensure adequate air supply and to avoid overheating do not place
the unit near radiators etc.
Blown fuses must be replaced by fuses of the correct
+
rating! Please refer to the "SPECIFICATIONS" section
for the applicable rating.
For connection to the mains use the enclosed power cord with cold
connector which complies with the relevant safety regulations.
Please make sure that all devices are properly grounded.
+
For your own safety, never remove or disable the ground
conductors from the devices or on the power cords. The
unit must always be connected to the mains outlet with
a protective grounding connection.
We would like to point out that high volume levels
+
may damage your hearing and/or your headphones/
loudspeakers. To avoid switch-on/off thumps from the
console and any downstream devices, always make
sure that your power amp(s) or active speakers are the
last components that are switched on and the first to
be switched off. Always make sure that the appropriate
volume is set.
Important notes concerning installation
The sound quality may diminish within the range of pow
-
+
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online Registration
1.1.3
Please register your new BEHRINGER equipment right after your
purchase by visiting http://www.behringer.com and read the terms
and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom the
equipment was purchased. Should your BEHRINGER dealer
not be located in your vicinity, you may directly contact one of
our subsidiaries. Corresponding contact information is included
in the original equipment packaging (Global Contact Information/
European Contact Information). Should your country not be listed,
please contact the distributor nearest you. A list of distributors
can be found in the support area of our website (http://www.
behringer.com).
Registering your purchase and equipment with us helps us process
your repair claims more quickly and efficiently.
Thank you for your cooperation!
The manual
1.2
This manual is designed to give you an overview of all control ele-
ments and at the same time inform you in detail about how to use
them. To provide you with a clear structure, we have grouped the
control elements according to their function. They can easily be
found on the enclosed numbered illustrations. If you need more
detailed information on specific topics, please visit our web site
at www.behringer.com. The product-related information pages
and the ULTRANET-based glossary explain the relevant audio
engineering terminology in full detail.
