DIGITAL REVERB/DELAY DR400
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊
The DR400 has no On/Off switch. It is operable as soon as you insert a plug into the
IN connector. Disconnect the plug, if you don’t use the DR400. In doing so, you can
extend the life time of the battery.
The
SERIAL NUMBER
is located at the underside.
◊
In rare cases interferences of the normal function may appear by external influence
(e.g. electrostatic discharge), as for example sound disturbances or malfunctions.
If this occurs, please turn down the volume on subsequent amplifiers and disconnect
the input connector briefly to restart the application.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specifications
In
Connector
¼" TS
Impedance
500 kΩ
Out A
Connector
¼" TS
Impedance
1 kΩ
Out B
Connector
¼" TS
Impedance
1 kΩ
Power Supply
9 V
𝌂
, 100 mA regulated
BEHRINGER PSU-SB
USA/Canada
120 V~, 60 Hz
China/Korea
220 V~, 50/60 Hz
Europe/U.K./
230 V~, 50 Hz
Australia
Japan
100 V~, 50 - 60 Hz
Power connector
2 mm DC jack,
negative center
Battery
9 V type 6LR61
Power consumption
65 mA
Physical/Weight
Dimensions
approx. 2 1/8 x 2 3/4 x 4 4/5"
(H x W x D)
approx. 54 x 70 x 123 mm
Weight
approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.
