CONCERT CDP2000-BK
Connection to external equipment
18
Saving parameter settings
5.6.5
The CDP2000-BK allows you to save the changes made to the
instrument’s settings, so that they won’t get lost when the unit is
powered down. When the save function is not active, all changes
made to the settings – except for the music sequencer data – will
be lost when you switch the piano off. When switched back on,
the CDP2000-BK recalls the factory default settings.
The save function can be activated separately for the following
groups of functions: sounds, MIDI, tuning and damper pedal.
Please enter EDIT mode (see chapter 5.1) and select the
+
following function.
Sounds
>
You can save the following settings for this group of functions:
Sounds (see chapter 2.4)
=
Layer mode settings (see chapters 4.1 and 5.3)
=
Type of room effect and intensity (see chapter 4.2.2)
=
Type of modulation effect and intensity (see chapter 4.2.3)
=
Key velocity (see chapter 5.6.1)
=
Metronome meter and tempo (see chapter 5.4)
=
Dimmed volume (see chapter 5.5.5)
=
Function:
E8.1
Value:
On, Off
Description:
Off:
Save function for sounds is disabled (default
setting)
On:
Save function for sounds is enabled
MIDI
>
You can save the following settings for this group of functions:
All MIDI settings (see chapter 6.3.3)
=
Function:
E8.2
Value:
On, Off
Description:
Off:
Save function for MIDI settings is disabled
(default setting)
On:
Save function for MIDI settings is enabled
Tuning
>
You can save the following settings for this group of functions:
Transposition (see chapter 5.2)
=
Fine tuning (see chapter 5.6.3)
=
Tuning (see chapter 5.6.4)
=
Function:
E8.3
Value:
On, Off
Description:
Off:
Save function for tuning settings is disabled
(default setting)
On:
Save function for tuning settings is enabled
Soft pedal
>
You can save the following settings for this group of functions:
Soft pedal function (see chapter 5.5.8)
=
Soft pedal intensity (see chapter 5.6.2)
=
Function:
E8.4
Value:
On, Off
Description:
Off:
Save function for soft pedal settings is disabled
(default setting)
On:
Save function for soft pedal settings is enabled
Restoring the factory default settings
5.6.6
Use the following procedure to recall the factory default set-
tings.
Tip: All saved parameters as well as the music se-
+
quencer data will be lost during either one of the fol-
lowing procedures.
Use the POWER switch to switch the instrument off (if not
1)
already done).
Play and hold down the top C key on the keyboard, then
2)
switch the CDP2000-BK back on.
+
An alternative procedure is described below:
Use the POWER switch to switch the instrument off (if not
1)
already done).
Press and hold down the TRACK 1 and TRACK 2 buttons,
2)
then switch the CDP2000-BK back on.
+
Let go of the TRACK buttons after about 5 seconds.
3)
Connection to external equipment
6.
The CDP2000-BK provides a variety of connectors for connecting
the instrument to external devices.
Caution
Be sure that all devices are switched off before you
+
make any connection.
NEVER connect the LINE IN connectors of the
+
CDP2000-BK to its LINE OUT connectors. This will cause
a feedback loop producing high volume levels which
could damage both the instrument and your hearing!
Connecting external sound sources
6.1
The CDP2000-BK is equipped with a stereo LINE IN connec-
tor for connecting external sound sources to your digital piano.
These signals are reproduced through the internal loudspeakers
and connected headphones. If you wish to practise with musical
accompaniment, you can use this input to connect a CD player or
drum computer. In the same way, you could connect an external
synthesizer or sound module and use its sound generator with your
