11
STEP 3
Adjust the gimbal roll – left and
right balance
• Release the roll
thumb M4 screw
(Fig. 6).
• Slide the roll arm left or right until
the camera find a balance position
and not lean left or right.
• In case more space is needed to
eigher side, back to step 2 .
Fig. 6. Roll balance
adjustment
STEP 4
Adjust the gimbal pitch - up and
down balance
There are two place to adjust the
pitch.
•
Loosen the pitch motor M4 thumb
screw No.1 push in the pitch arm
into the motor until it end. Only
adjust the second pitch level(M4
thumb screw No.2) make it up and
down until the camera can hold the
position.If the pitch range not
enough for higher camera balance
then you can loose the M4 thumb
screw No.1 to make it balanced.
• Tighten the thumb screws.
Fig. 7. Pitch balance adjustment
1
2
（
If the step 2 still not balance the right and left then use this step.
）
2016 Beholder All Right reserved
