BEHABELT FZ01 Vario, Руководство пользователя

Страница: 15 / 20

15
Insert welding paddle between the two ends of the belt and relax the handholds. The la-
teral thumb screws
2
forces the two ends of the belt automatically during the melting
process onto the hot welding paddle surface.
A total of 3mm to 4mm of material will be used to form a bead on both belt ends.
Wait for a bead to form between each of the belt ends and the paddle.
Open the guide clamp slightly and remove the welding paddle quickly without letting a
large amount of melted material stick to the paddle. Immediately let go of the handle.
The automatic pressure setting is suffi cient to get a good welding seam.
Leave profi le clamped for 3-5 min. within the guide clamp to cool off.
3.3 REMOVE THE BEAD
After each welding procedure the welding paddle should be cleaned by using a belt rem-
nant piece or a cotton cloth. Otherwise the future weldings get polluted and can break.
Take out the profi le and remove the bead upset with the BEHAbelt SE02 edge cutter.