Beha-Amprobe VOLT fix, Инструкция по эксплуатации

Страница: 19 / 40

Direct voltage indication
(Contact via metal probe and contact electrode)
Direct voltage testing on the conducting UUT
surface can be carried out by selecting position 3
(different to contact-free voltage detection).
For this purpose, place the metal probe onto the
measurement spot whilst touching the contact
electrode.
19
Switch-
Position
Measuring
Principal Function
Position
Pos. 1 Indirect
(contactless) Contactless voltage
detection
LED is blinking and sig-
nal is audible!
Torch function is active
Pos. 2 Indirect
(contactless) Contactless voltage
detection
LED is blinking and sig-
nal is audible! Torch
function is blinking
Pos. 3 Direct
(metal probe
and Contact
electrode)
Contacting voltage
testing
LED is blinking signal is
audible. Torch function is
blinking. Continuity is
active (UUT must be vol-
tage free)