14
Visual to IR effective image
alignment
≥ 45 cm (18 in), optimal for 1 m
Laser sighting to center of
visual image
≥ 45 cm (18 in) typical
Laser sighting to UV field
Approx. 45 cm (18 in) typical
Operating and storage
altitude
< 2000 m (< 6561 ft)
Drop proof
1.2 m (4 ft)
Vibration and shock
IEC 60068-2-6, 2.5g, 10 to 200 Hz, IEC 60068-2-
27, 50g 11ms
Power supply
Three (3) 1.5 V AA IEC LR6 alkaline batteries
Battery life
8 hours with display ON (Typical)
Power consumption: 220 mA (Typical)
Auto power off
Selectable modes: OFF, 1 minute, 2 minutes, 5
minutes and 10 minutes
Agency approvals
P
Laser safety compliance
IEC 60825-1, Class 2
Electromagnetic
Compatibility
EN 61326-1
Korea (KCC): Class A Equipment (Industrial
Broadcasting & Communication Equipment)
[1]
[1]
This product meets requirements for
industrial (Class A) electromagnetic wave
equipment and the seller or user should take
notice of it. This equipment is intended for
use in business environments and is not to be
used in homes.
Size (H x W x L)
Approx. 185 x 54 x 104 mm (7.3 x 2.1 x 4.1 in)
Weight
Approx. 0.29 kg (0.64 lb)
MAINTENANCE AND BATTERY REPLACEMENT
Do not use abrasives, isopropyl alcohol, or solvents to clean the case or lens/
window. If used and stored properly, the infrared lens on the product should
require only occasional cleaning (Figure 3.1).
When necessary, to clean the lens:
1. Use a hand-squeeze air pump to gently blow off any dust or debris from
the lens surface.
2. If the lens surface requires additional cleaning, use a clean, fine-fiber cloth,
micro-fiber cloth, or cotton swab dampened with a mild, soapy water
solution. Gently wipe surface of lens to remove smudges and debris.
3. Dry with an absorbent, clean fine-fiber or micro-fiber cloth.
Note:
Minor smudges and dirt should not significantly affect the performance
of the product. However, large scratches or the removal of the protective
coating on the infrared lens can affect both image quality and the
temperature measurement accuracy.
