Bego Nautilus CC plus Скачать руководство пользователя страница 69

Страница: 69 / 88

English

⋅

Nautilus

5 B

-en

/00

11. Enter the additional heating time for melting

(see the table on page 35) using the "+" and "-"
buttons.
The timer counts down the entered seconds
and thus determines the time to cast.

12. Once the timer has run down and the alloys

melt visually appears to be ready for casting,
press the "Casting" button to trigger the casting
process.

The casting is carried out with overpressure.
Alloy, chamber pressure, and casting number
will be displayed during that process.

13. Remove the mould.
14. Close the mould door. The casting process is

completed.

WARNING

Never look into the melt without
protective glass and protective
eyewear!

NOTICE

Important:

The movement of the melt is caused

by the magnetic field, not by the heat. The moving
melt is, therefore, not a boiling melt!

WARNING

Risk of burns!

Use mould tongs!

Содержание Nautilus CC plus

























































































Результаты поиска

Содержание Nautilus CC plus

Отзывы:

Бренды по названию

Популярные бренды

Bego Nautilus CC plus, Руководство пользователя

Результаты поиска

Содержание Nautilus CC plus

Отзывы:

Бренды по названию

Популярные бренды