Bego Nautilus CC plus Скачать руководство пользователя страница 57

Страница: 57 / 88

English

⋅

Nautilus

CC plus

5 B

-en

/00

The chamber is evacuated during preheating.
The preheating may last for up to 60 seconds.

Have the mould readily available before press-
ing the "OK" button to prevent the alloy from
cooling down unnecessarily. Preheating tem-
perature and vacuum are maintained until
then.

Close the mould door.
The next display is shown when the mould
door is closed.

10. Confirm the melting process with "OK".

In fast mode, the next step will be triggered
immediately upon closing the mould door.
The process can be aborted by pressing the
"Abort" button.

CAUTION

The temperature cannot be
measured and thus not be limited
without the pyrometer!

Stay with the device and finish the
preheating and melting as described
manually!

WARNING

Risk of burns!

Use mould tongs!

WARNING

Never look into the melt without
protective glass and protective
eyewear!

Содержание Nautilus CC plus

























































































Результаты поиска

Содержание Nautilus CC plus

Отзывы:

Бренды по названию

Популярные бренды

Bego Nautilus CC plus, Руководство пользователя

Результаты поиска

Содержание Nautilus CC plus

Отзывы:

Бренды по названию

Популярные бренды