Beghelli USA • 3250 Corporate Way • Miramar, FL 33025 • TEL: 954-442-6600 • FAX: 954-442-6677
Fig 4 Fig 5 Fig 6
OPERATION
1.
During an electrical power failure, the lamps on the unit will automatically come ON for a minimum of 90 minutes.
2.
To test this unit, let it charge correctly with AC power supply for a minimum of 24 hours after its first installation
and then depress the “TEST” switch, the emergency lamps will illuminate. When the switch is released, the lamps
will turn OFF.
3.
Additional operation for PLM2-S.
1)
The light will not turn on if the ambient illumination is sufficiently bright,
2)
The light will turn on automatically whenever a motion is detected within 5 meters, in dark and it will go off after
about 15 minutes if motion is no longer detected.
3)
If the lens become dirty, clean it by wiping with rubbing alcohol. Do not scratch the lens
LED WIRING DIAGRAM
PLM2 PLM2-S
