BEGA Gateway 70 588, Инструкция по установке и запуску

Страница: 8 / 52

8 Gateway 70 588
Chapter 1 | General information
1.6 Technical information
System information
•
ARM926 CPU, 400 MHz
•
128 MB DDR2 SDRAM
•
256 MB NAND Flash
•
8 MB NOR Flash
Standards
•
IEEE 802.3af PD
•
IEEE 802.15.4
•
ZigBee 2007 PRO
Dimensions
Length: 106 mm
Width: 106 mm
Height: 26 mm
Gateway Server Software
•
Smart Facility Server
•
ZigBee Over-the-Air
Upgrade Server
•
ZigBee/IP Gateway (GRIP)
•
Linux OS
Power supply
•
5 V DC
•
Power consumption <1 W
Colour
Black, aluminium
Material
Aluminium (brushed) &
Synthetic material
Weight
approx. 500 g
1.7 Wall mounting
The gateway can either be simply put up or mounted on a wall. If you want to install the gateway on a fixed
position make sure that you don’t damage switches, power sockets, gas and water pipes, when determining
the mount position and drilling next to the ones mentioned above.
Don’t mount the gateway on metal boards or other environments that can impair RF transmissions. Information
about troubleshooting can be found in section 3.13 “Notes on troubleshooting”.
•
Place the drilling template at the desired mount position and adjust it appropriately. Ensure that the
network connectors and power connectors and wires have enough space.
•
Mark the position of both the drill holes A and B with the help of the drill template and a pencil.
•
Drill at the two marked positions holes with a diameter of 5mm into the wall. After that, put a dowel in each
hole. Turn the screw into the dowel so that they are about 6mm out of the wall. Put the unit with the rear
recess on the screw heads and hang it on.