BEGA Gateway 70 588, Инструкция по установке и запуску, Страница: 21 / 52

21 Gateway 70 588
Chapter 3 | Configuration
If you want to set the system date and time manually, follow these steps:
1. Deactivate the option “Synchronize date and time automatically” by clicking on the check mark (see figure 17).
2. A mask for manual configuration will automatically be displayed (see figure 18).
Click the corresponding text boxes to specify date and time.
3. Click on the “Save” button after finishing the configuration.
Figure 18
Note: After loss of the supply voltage, the integrated battery can hold the time updated for a while. After that
the clock starts again at 0:00 a.m. on 01/01/1970.
3.2.3 Time zone
In the “Time zone” section you can define the time zone. The default value is set to Europe/Berlin. By defining the
time zone, conversion of coordinated world time to local time is performed. To change the time zone, follow these
steps:
1. Click the “Change time zone” button (see figure 19).
2. Use the list box to select the city that matches your local time (see figure 20).
3. Click the “Save” button to save your settings.
Figure 19
Figure 20