3.02 - Setup
Notice to dealer:
Pre-delivery setup and service including lubrication is the
responsibility of the authorized dealer. It is up to him to assure that the machine is in
perfect condition and ready to be used. It is his responsibility to ensure that the
customer is aware of all safety aspects and operational procedures for the implement.
He must also fill out the Pre-Delivery Checklist
3
prior to delivering the implement.
3.03 - Assembly Instructions
For transportation purposes the main components of the rear blade are shipped
unassembled.
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire. They
often have extremely sharp edges and cut very easily.
To assemble the rear blade proceed as follows (see fig. 3):
1. Securely block blade assembly (composed of moldboard
(#5)
and swivel box
(#1)
that are pre-assembled at the factory) with blocks or stands so that the swivel box
(#1)
is upward.
O
PERATION
11
BEFCO
R
EAR
B
LADES
O
PERATOR
’
S
M
ANUAL
3
See Chapter 7 - Pre-Delivery Checklist.
1
10
Fig. 3 - Rear blade assembly.
5
2
3
7
8
6
4
9
11
12
13
