M U X L I C E R
D I A G R A M S
M I S C E L A N E A
U S E R M A N U A L
P A T C H E X A M P L E S
.6
SLI CI N G SI GN ALS
With Muxlicer, you can slice any modular signal in the onboard analog switch circuit. Just plug a
few signals into the Mux I/Os that you want, the COM I/O to your Out Module and press the play
switch. Now you might listen a sequence with your signals sounding on their corresponding steps.
If you plug a signal to All In input, it will be present in all the steps of the sequence except the
ones that already have a signal. Finally, you can control the level of any signal with its
corresponding level fader.
BASI C SEQU EN CI N G
Without signals presents into the Analog Switch, the module works as a powerful 8 step Gate/CV
sequencer with selectable CV range and gate retriggering. Just plug the COM I/O to the V/Oct input
of your oscillator and the All Gate output to the gate/trig input of your voice envelope and you're
ready to go. Set the note of each step with its corresponding level fader and adjust the range of
the CV playing with the switch at the same time you press the encoder. Also you can control the
retriggers of the gates via the Gate Mode pot and its associated CV input.
All manuals and user guides at all-guides.com
