M U X L I C E R
R E F E R E N C E
F U N C T I O N A L
B L O C K S
U S E R M A N U A L
D I G I TA L S T E P C O N T R O L L E R
.3
RESET/ON E SH OT I N
This input has dual function (exactly same functions as Play switch Down click). It Works
as
“Reset IN”
during play and as
“One shot play IN”
during stop.
During play:
When a trigger or gate is
present the count will be reset to the step 1 ,
independently of any other parameters.
Connect Gate outs to this input limit the
amount of steps that Muxlicer counts.
During stop:
This input will start a “One
Shot” cycle. Muxlicer will count until 8 then
stop. Use this to generate gated arpeggios or
(together with the EOC Out) chain more than
one muxlicer in series. If a second trigger is
received before the count finished, it will
reset to step one.
SPEED DI V/M U LT EN CODER
This encoder have four different functions:
1.
Tap Tempo
Tap this button twice the tempo will be set at the speed of
the interval between this two taps. If you tap more than twice
(in a short time) the time between them will be averaged to
improve timing precision. Tempo adjustments are stored in
nonvolatile memory so it remains even when the device is
turned off.
2.
Count Speed
Turning the encoder will always change the speed. When the
module works with internal clock it change the tempo. When
the module works with External clock it divides or multiplies
the incoming clock.
3.
Clock Out Div/Mult
Holding the encoder down and turning it the same time you
can divide or multiply the Clock Output.
4.
CV Range
Holding the encoder down and pressing the Play Switch Up or
down at the same time (without releasing the encoder), you
can adjust the range of the CV at Com I/O. Long push of Play
switch, will move fast, and short push will move on small
increments. All Speed adjustments are stored in nonvolatile
memory.
All manuals and user guides at all-guides.com
