Beeverycreative B2X300, Инструкция по сборке

Страница: 6 / 63

4
TECHNICAL SPECIFICATIONS
LAYER RESOLUTION (user defined)
3D PRINTING TECHNOLOGY
PRINTING MATERIAL
MAX. BUILD VOLUME (up to)
HEATED BUILD PLATE
HEATED BUILD PLATE TEMPERATURE
DUAL EXTRUDER
NOZZLE DIAMETER
EXTRUDER MAX TEMPERATURE
TRINAMIC TMC 2130 DRIVERS
FILAMENT END DETECTION
MODULAR MOTHERBOARD
SENSORLESS HOMING
POWER LOSS DETECTION AND RECOVERY
EASY OFFSET CALIBRATION
STRUCTURE MATERIALS
PRINTER SIZE
WEIGHT
AMBIENT OPERATING TEMPERATURE
STORAGE TEMPERATURE
AC INPUT
POWER CONSUMPTION
CONNECTIVITY
INCLUDED ACCESSORIES
SUPPORTED FILE TYPES
AUTO BED LEVELLING
FIRMWARE
ELECTRONICS
RECOMMENDED 3D PRINTING/ SLICING SOFTWARE
SPEED
ASSEMBLY EXPERIENCE
50 - 300 microns
FFF
PLA, ABS, PETG, NYLON, Wood Composits, Metal Composits, HIPLA,
ABS-PC, HIPS, Carbon Composits
300 x 200 x 300 mm (11.81 x 7.87 x 11.81 in)
Yes (with 4mm removable glass surface)
50ºC (122ºF) – 130ºC (266ºF)
Yes, with two nozzle dual extruder
0.4mm | 0.4mm (other nozzle diameters available)
300ºC (572ºF)
Print more silently, especially on stealth mode. Faster printing speeds
with reduced vibrations and improved motion precision, without compro-
mising print quality. Up to 256 microsteps.
Ability to detect absence of filament
Allows for future upgrades and customization
No limit switches required, thanks to the trinamic drivers
Possibility to resume printing after a power loss
Simple one step method, does not require mutiple test prints
High-quality powder-coated steel frame, Steel guides Removable glass
build plate,Full metal dual extruder
56 x 37.5 x 60 cm (22,04 x 14,76 x 23,62 in)
12kg (26,45 lb)
10-30ºC (50-86ºF)
5-35ºC (41º -95º F)
110-240VAC | 50-60Hz
360 W
SD Card | USB
Power cable | USB cable | Grease
.gcode
Auto Bed Levelling using a 15 point mesh, interpolated to 45 virtual
points
Marlin based
MKS Gen
Cura | Slic3r | Simplify 3D
up to 200 mm/s
+/- 6 hours