Beeverycreative B2X300, Инструкция по сборке

Страница: 3 / 63

1
NEEDED TOOLS
Before you start to build your B2X300 3D printer, check if you have the necessary tools
to do it. You will need the following:
You will need a set of hex key for
the assembly.
There is a 1.5mm hex key
supplied with the kit.
Sometimes you might need to use
some extra strengh assembling
the printer.
You will need it towards the end. Always a helpful tool.
You will also need to remove
some strands from the
printed vparts with a cutter.
Take great care not to cut
yourself when doing this.
There is a Double Ring Spanner
included in the Structure Frame,
which can make the screw task
easier and quicker.
SET OF HEX KEYS SOFT FACE HAMMER
FLATHEAD SCREWDRIVER REGULAR PLIERS
BOX CUTTER
DOUBLE RING SPANNER
There is also a nozzle changing
tool in the Structure Frame, wich
will be usefull on a future
changing nozzle process.
NOZZLE CHANGER
You need a marker to write on the
labels, for better guidance
while building B2X300.
MARKER