22
4. SYSTEM CONNECTION (if additional camera)
DC12V
CAM 1
Video
Alimentation
Video
Alimentation
Back camera
CAM1
Monitor
RED WIRE
+12V Reversing light
BLACK WIRE
Ground
Do not connect & ISOLATE
Please protect this connector so that it does not
come into contact with a metal part of the vehicle
CAM 2
Vidéo
Alimentation
RED
+12 After ignition
BLACK
GROUND
Front camera
CAM2
Switch (2) control of the front
camera and the screen
loop:
O`al] )!eajjgj[Ye]jY
O9JFAF?N=@A;D=KFGL9DDGOAF?9F=PLJ9HGO=J
;GFKMEHLAGFGFJ=N=JK=DA?@L
On some vehicles, the +12 V Reversing light is noisy when the engine is running
that may interfere with proper operation of the parking sensors or reversing
camera kit.
In other cases, +12 V Reversing light allows no additional power consumer.
For these vehicles, BEEPER has developed the RCANR2 module to retrieve
infor12V Reversing light from the CANBUS network. This module connects
to the CANBUS compatible carrier and can deliver a +12 V Reversing light for
connecting a parking sensor or a backup camera
Ref : RCANR2, more info & list of compatible cars, please follow the link :
http://www.beeper.fr/radar-camera-de-recul/rcanr2.php
For the selection
of the loops of
the camera see
page 8
8 m. cable
For long vehicles, an extension of 8 m. are
optional Model: RX40 / 8
For the selection
of the loops of
the camera see
page 8
