Beem i-Joy Cafe, Руководство пользователя

Страница: 25 / 104

BEEM - Elements of Lifestyle EN 21
3. Fill the milk container (5) with water up to
the MAX mark.
4. Insert the milk container into the appli-
ance correctly.
5. Put one strainer insert (10 or 11) without
coffee into the holder (15) as described in
the section Installing the strainer insert
(page 22) .
6. Put the strainer holder into the appliance.
7. Insert the plug into the mains socket.
8. Switch on the appliance with the ON/OFF
switch (4).
9. Put a suitable cup onto the resting grate
of one of the drip trays (16 or 17).
10. Press and hold down the selector switch
(12) for 3 seconds and allow the water for
one coffee/lungo/diluted black coffee to run
through. When the appliance is new, it can
take a few seconds until the system has filled
with water.
11. For Latte subsequently press the but-
ton for 3 seconds to rinse the steam nozzle
(6).
12. Repeat the last step with a little coffee
powder in the strainer insert.
13. Use the ON/OFF switch (4) to switch the
appliance off.
14. Allow the appliance to cool down.
15. Clean the appliance and the accessories
as described in the section
Cleaning and
maintenance (page 27) .
NOTE
► During the pumping process, unusual
noises may be heard. These noises will
stop after the appliance is filled with water.
► When using for the first time, it is
possible that production-related additives
such as grease could cause slight odour or
smoke. This is completely normal. Ensure
sufficient ventilation.
Appliance description
Overview / Delivery contents
(See illustration on the left fold-out page)
1
Rest/hotplate for cups
2 Operating panel with 3 indicator lamps
3 Water tank
4 ON/OFF switch
5 Milk container
6 Steam nozzle
7 Steam and milk froth regulator
8 Steam nozzle operating lever
9 Measuring spoon
10 Strainer insert (1 cup)
11 Screen insert (2 cups)
12 Espresso , and
lungo selector switch
13 Cappuccino , and
Latte selector switch
14 Latte Macchiato and
Clean selector switch
15 Strainer holder
15a Strainer holder retaining bracket
16 Large drip tray with resting grate
17 Small drip tray with resting grate
18 Strainer holder mounting
19 User manual (not illustrated)
Indicator lights
The appliance is equipped with 3 indicator
lamps (12-14).
‹
All 3 indicator lamps flash when the appli -
ance is switched on and heats up.
‹
All 3 indicator lamps (12-14) light up per-
manently when the heat-up phase is complet-
ed, the appliance is ready for operation and
the milk container is correctly inserted.
NOTE
► During the heat-up phase, water can
drip out of the strainer insert holder. There-
fore, always insert a drip tray (16 or 17)
and make sure that it does not overflow.