EN
30
5. Use
the
H
(
23
) and
M
(
21
) buttons to set the start time you want (see the “Handling and
Operation” chapter – “Time”).
For
making coffee with coffee beans
, use the button (
19
) to set the coffee strength
you want.
6. To activate the preset time, press the
TIMER
button again. The
symbol (
15
) appears
on the display. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The operating lamp
lights up and the
(
17
) symbol
fl
ashes on the display.
If the indicator on the display should stop
fl
ashing even though the setting has not yet
been completed, press the
TIMER
button again for around 3 seconds. The indicator on
the display
fl
ashes again and the settings can be resumed.
Deactivating the Preset Time
To deactivate the preset time setting, press the
TIMER
button (
20
). The
symbol (
15
)
goes out and the programming is deactivated. However, the preset time is retained and can
be reactivated at any time until a new preset time is programmed in or the device has been
disconnected from the power supply.
Cleaning and Care
NOTICES
•
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These can damage the surface.
1. Clean the permanent
fi
lter, the
fi
lter insert and the glass jug (
6
) after every use with mild
detergent and warm water or in the dishwasher.
2. Clean the thermal jug after every use with mild detergent and warm water. It is not suitable
for the dishwasher!
3. If necessary, wipe down the coffee bean compartment (
2
) and the lid (
1
) with a damp cloth.
4. Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to
remove more intense soiling.
5. Check the mains cable regularly for any damage.
Cleaning the Grinder Shaft
1. Remove the coffee beans from the coffee bean compartment (
2
). (Apart from the few
beans that you cannot reach by hand.)
2. Insert the permanent
fi
lter into the
fi
lter insert.
3. Press
the button (
18
) to switch on the device. The grinding process will start.
