Multi Function LAN Cable Tester
BT-LT1200
User Manual
19
1
IP camera or other network equipment's Ethernet port is working normally and the IP address is correct.
It's normal that the first data packet will be lost when test start.
5.3
IP search
Connect a network cable to the meter's “PING/Port flashing” port, press key to “IP Scan” icon and enter to app
interface.
Press key to “Set IP” function, press to set the tester’s IP address, the tester’s IP address must be
same network segment with the scanned network equipment, and select the “Scan” and press confirm key, then
can quickly search the IP address of the IP camera or other equipment connected to the tester.
5.4
NetSpeed
Connect a network cable to the meter's “ RJ45” port, press key to “NetSpeed” icon and enter to app interface.
Connected to the tested IP camera or Ethernet device to tester, the top of the screen shows "network
succeeded", can automatically detect and identify information such as connection speed and duplex mode. If it
says "network failed", please check whether the connection port is correct and whether the connected device is
working normally.
