Multi Function LAN Cable Tester
BT-LT1200
User Manual
17
1
When select user-defined to test, please press key to adjust the cable speed.
User-defined calibration: Prepare one piece calibrated cable, the cable length must be over 50 meters, the better
length is about 100-200 meters. Enter cable type interface, and select “User-defined”, total has 4 groups user-
defined.
Press key to adjust the cable speed, when the screen display length and real length are the same, please
select the start, then press to confirm. Press the to select the cable type, press “Save” key to save
the calibration data. When the cable have been calibrated, can select the corresponding name “User-defined x”
to test this cable again.
Application:
TDR test is the use of pulse reflection method, to transmit pulse signal for tested cable, when cable is
open circuit or short-circuit, reflected pulse is generated, the tester receives and deals with the reflected wave,
measurement results displayed on the screen. TDR can test cable open circuit and short circuit, help engineer
quickly find the cable's problem location. It is more convenient and efficient to repair the faulty cable.
Note: The TDR reflect signal could be affected by the cable quality cable's not well connected etc to
cause the different TDR measurement. The TDR measurement is for reference only.
5.
Network test
5.1
Port flicker
Connect a network cable to the meter's “PING/Port flashing” port, press key to “Port flicker” icon and enter to
app interface.