5
8) Fit The Towel Rack
If you purchased the optional towel rack, you can
attach it to either the right or left side panel.
First, unscrew and remove the plastic end
caps from the towel rack. Then, using 2
countersunk screws, washers and nuts,
attach the towel rack to the side panel.
You may need to slide the towel
rails out of the way to access the
screw holes.
Tighten immediately.
You can fit the towel rack to either
the left or right side panel.
Assembly Instructions
6) Fit The Lower Back
Panel
Both back panels are identical.
Screw one of the back panels to the base and
side panels using 7 Allen head screws, washers
and nuts.
Hand tighten only at this stage.
7) Fit The Upper Back
Panel
Screw the other back panel to the side
panels. Use only one Allen head screw,
washer and nut on each side, in the
uppermost hole.
Hand tighten only at this stage.
