12
Troubleshooting
Condition Possible Cause
Solution
Flame goes out while in use
Empty Gas cylinder.
Replace cylinder.
Air mixed in hoses.
Re-ignite and allow operating for a short while, till clears
out
Blockage
Seek professional assistance.
Ignition failure
gas cylinder valve close
Turn off knob button, then open the cylinder valve
Air mixed in the hoses
Re-ignite and allow operating for a short while, till clears
out.
Rubber hose wrapped,
deformed or pinched
Release hose, ensure not damaged or leaking
Spark Escaping
Visually ensure the spark is present at end of tube. If
not, seek professional assistance.
No Pilot Flame
Check that ignition pilot tube is clear. If so, seek
professional assistance.
Foul smell of gas
Damage to hose
Turn cylinder valve off, replace hose.
Leakage
Leak-test, and tighten where required.
If leakage can’t be rectified, cease using appliance, and
seek professional assistance
Burner went off
Shut off valves, wait for 5 minutes and reignite
Incorrect combustion
Seek professional assistance
Flame appear to separate off the burner or
flame burns with noise
blockage of some burner Ports
Clean the burner thoroughly.
If problem persists, Seek professional assistance
Incorrect gas pressure
seek professional assistance
Yellow Tipping in Flame
Air/Gas mixture in burner
incorrect
Try to adjust air opening at burner to remove yellow. If
not changing, seek professional assistance.
Bugg_Ins_Au_D0
