6
7
GAS CYLINDER SAFETY INFORMATION
KNOW YOUR BARBECUE
KNOW YOUR BARBECUE
SAFETY INFORMATION
1
8
9
2
3
7
4
6
5
11
10
1
Barbecue Body
2
Hood
3
Cooking Grill
4
Cooking Plate
5
Side Burner***
6
Warming Rack
7
Rotisserie Bracket**
8
Cabinet Trolley*
9
Vaporizers
10
Burner
11
Gas Cylinder (sold separately)
* Trolley is packed in a separate carton.
** Rotisserie and bracket sold separately.
*** Available on selected models only.
Gas cylinders must be stored outdoors, out of reach of
children and must not be stored in a
building, garage or any other enclosed area.
• This appliance is designed to be used with a gas cylinder
not exceeding 9KG (20lbs) capacity.
• The Gas cylinder must be constructed and marked in
accordance with specifications for LP Gas Cylinders.
• Ensure gas cylinder is within the expiration date, it is not
advised to use or attempt to refill a gas cylinder that is
outside of it’s expiration date.
• The gas cylinder supply valve must be turned off when
the appliance is not in use.
• The gas cylinder used must incorporate a safety collar to
protect the valve assembly.
• The gas cylinder must always be kept and used in the
upright position.
TIPS & INFORMATION
IMPORTANT
When disconnecting and removing the gas cylinder for
the purpose of refilling, always observe the following
procedure:
• Ensure that all gas control valves on the appliance and
the gas cylinder are turned off before disconnecting the
gas line from the cylinder.
• Do not smoke or use a naked flame near the appliance
or gas cylinder while disconnecting the gas line between
the appliance and gas cylinder.
• Remove the gas cylinder from the enclosure before
disconnecting the gas line from the appliance.
• Tighten all connections before placing the gas cylinder
back in its enclosure.
The Gas Leak Testing Procedure should be conducted every
time the gas cylinder is refilled and reconnected to the
appliance – before using the appliance.
Regulator Connection
1. Check that all control knobs are in the ‘Off’ position.
2. Make sure the cylinder valve is off by turning the valve
knob all the way clockwise.
3. Remove the protective cap from the cylinder if present.
4. Make connection as described in figures 1 and 2.
5. Leak-test the connection with a soapy water solution.
(See Gas Leak Testing Procedure).
Hose and regulator replacement must be a genuine part
specified for this appliance and is obtainable from your
nearest BeefEater stockist.
FIG 1
Standard POL regulator
FIG 2
Quick connect regulator
Gas Leak Test Procedure
Use the following procedure to check for gas leaks.
Never use a naked flame to check for gas leaks.
1. In a small container, mix up a solution of water and
detergent or soap. Mix the solution well.
2. Make sure that the gas supply valve on the gas cylinder
is turned on.
3. Make sure that the gas control valves on the appliance
are all turned off.
4. Using a brush or spray bottle apply the solution to the
gas line and each join in the gas line. See Fig 3.
5. Bubbling of the solution will indicate that there is a leak
present.
6. Re-tighten or re-seal any joints that are leaking.
7. If a leak persists then contact your distributor or the
manufacturer for assistance.
FIG 3
Model no.
Number of
burners
Finish
Side burner
included
Type
BDMG420BA
4
Black enamel
No
Mobile
BDMG520BA
5
Black enamel
No
Mobile
BDMG424BA
4
Black enamel
Yes
Mobile
BDMG524BA
5
Black enamel
Yes
Mobile
BDMG324SA
3
Stainless
No
Mobile
BDMG424SA
4
Stainless
Yes
Mobile
BDMG524SA
5
Stainless
Yes
Mobile
BDBG320SA
3
Stainless
No
Built-in
BDBG420SA
4
Stainless
No
Built-in
BDBG520SA
5
Stainless
No
Built-in
