Selkirk College IATPL Program Manual
Beech 95 POH
Effective September 1, 2005
Appendix 14 - 50
Single Engine Cruise Performance
The Beech 95 operating manual does not contain any information on single engine cruise
performance. However you will have an opportunity to fly the airplane on one engine
during your training and should take note of the actual single engine cruise performance.
Our experience over the years is that full power or climb power is required to sustain safe
single-engine cruise and the indicated airspeed varies from 100 to 105 depending on
weight, altitude, and temperature.
Because single-engine cruise uses
“
climb power
”
and speed it is safe to set the mixture as
you would normally in a climb. We recommend using the climb performance fuel flow
chart on page 6-10 (copied on next page of this manual) For example, at 5000 fuel flow
would be 15.5 gph.
In summary, we recommend assuming 100 KIAS single engine (this is conservative)
calculate the TAS and assume 16 to 17 gph depending on altitude (use chart on 6-10 of
the POH). From this you can calculate your single engine endurance and range.
NOTE: The climb fuel flow values are printed on the face of the fuel flow gage, as you
can see in the photograph below.
Содержание Beech 95 2017
