Selkirk College IATPL Program Manual
Beech 95 POH
Effective September 1, 2005
Appendix 14 - 21
In addition, GSAK has two Nacelle tanks, one mounted in each engine nacelle. The
nacelle tanks are not serviceable and are not to be used.
Each airplane has two fuel quantity indicators. A switch on the pilot sub-panel selects
whether these gauges show quantity in the main tanks or auxiliary tanks. There is no
quantity indicator for the nacelle tanks.
Each airplane has two fuel selectors located between the pilot seats. Each selector can be
set to MAIN, AUX, CROSSFEED, or OFF. In addition GSAK has two additional
selectors just aft of the other selectors, which are for the nacelle tanks. Each nacelle tank
selector can be set to ON or OFF. When selected ON the nacelle tanks drain by gravity
into the main tanks.
WARNING: The nacelle tanks in GSAK are inoperative and the selectors must remain in
the OFF position to prevent any contamination from entering the main fuel tanks.
The left fuel selector provides fuel to the left engine and the right fuel selector provides
fuel to the right engine.
Total Capacity ........................................................... 112 US gallons
Total useable fuel ...................................................... 106 US gallons
Main tanks ........................................................... 50 US gallons total
Main tanks ...................................................... 44 US gallons useable
Auxiliary tanks .................................................... 62 US gallons total
Auxiliary tanks ............................................... 62 US gallons useable
Nacelle tanks ................................INOPERATIVE
–
DO NOT USE
Note: takeoff is prohibited with less than 10 gallons in each main tank.
A yellow band on the fuel gauges, applicable only when main tanks are selected, marks
the minimum fuel for takeoff.
Selecting CROSSFEED must only be done with one selector at a time. A mechanical
interconnect prevents selecting crossfeed on both selectors simultaneously.
When CROSSFEED is selected that engine takes fuel from the other engines fuel
selector. Therefore both engines are operating on the same fuel tank when crossfeed is
selected.
WARNING: Always switch the fuel quantity indicator to match the fuel selectors. Failure
to do so results in incorrect fuel quantity indications.
Содержание Beech 95 2017
