- 04 -
1.
LED display
2.Temperature setting
Press the power button for the first time to power on normally, the display defaults to low temperature
.
Press the setting button, when the temperature display screen flashes, press the temperature up key "+" or
the temperature down key "-" to set the desired temperature. The temperature displayed on the LED display
will change accordingly. There are a total of 10 temperature settings: (low) LO-02-03-04-05-06-07-08-09-HI
(high).
Setting button: press once for temperature flashing and press twice for timing flashing.
Press the setting button, the time display on the screen will flash, and the default time is 8H. Press the up key
can be selected from the following range: 01-02-03-04-05-06-07-08-09-10 hours. Once selected, the
corresponding time display will flash 3 times.
4.Preheat button
Press the preheat button, the LED screen will display "PH", and the product will start to work in high-grade
mode.
CAUTION
2.Caution:the cord must be completely connected a risk of fire couldoccur with a loose connection
3.Check with your healthcare provider before using with a pacemaker or any medical devices
WARNING:
This product is equipped with a SAFETY SYSTEM. This sensor technology prevents the blanket
Please note that for safety, the product could not be operated any longer after the malfunction. If the overheat
protection is activated, please contact us.
CONTROL PANEL FUNCTION BUTTON
INSTRUCTIONS FOR USING THE FUNCTION BUTTONS
ON THE CONTROL PANEL:
Power button
Settings button
Preheat button
Temperature increase button
Temperature decrease button
LED display
Temperature indicator
Time display
